Features

• Speed transfers of up to 30GB per minute.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4/LVM), and Mac(HFS, HFS+, HFSX.)
• Data Sanitization: Full erase, DoD erase and Secure erase.
• Open platform design supports multi-interface HDD/SSD.
• Supports 2.5″, 3.5″ SATA HDD, SSD.
• Real time PC monitoring.
• Log report management records all task details for enhanced production management.

Intelligent Duplication Modes

U-Reach MT-U Series SATA HDD duplicator is capable of copying at 30GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

Illustration of Copy Modes

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

Sanitization Methods

Auto Rejection of Slow Devices

MT-U Series HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.

Double Data Verification: Compare + CRC Checksum

U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.

Skipping Bad Sectors

End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.

Optional Adapters Supported

Event Log Report

U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Features

• Open-platform design supports a wide range of HDDs/SSDs with multiple interfaces.
• Directly supports both SAS and SATA devices with high-speed data transfer up to 30 GB per minute.
• Complies with DoD 5220.22-M, NSA Erase, and NIST 800-88 data sanitization standards.
• Supports asynchronous erase for improved efficiency.
• Includes log report management to record all task details for enhanced production control.
• Supports SATA I/II/III and 4Kn hard drives.

U-Reach MTS-SAS series is a professional SATA/SAS HDD duplicator, specially designed for high volume duplication. Equipped with U-Reach ‘s unique multitasking technology. The MTS-SAS series Hard Drive duplicator can simultaneously copy all targets and with a high transfer speed up to 30GB per minute. We guarantee highest productivity without speed degradation, even when the number of targets increase.

The MTS-SAS series SAS/SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32 and Mac (HFS, HFSX, HFS+) are supported formats with quick copy. Quick copy mode copies data and skips blank area; this mode enhances copy speed.

In addition, the MTS-SAS series SAS/SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.

Impeccable High Speed

U-Reach MTS-SAS Series SATA/SAS HDD/SSD duplicator is capable of copying at 30GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

Intelligent Duplication Modes

U-Reach MTS-SAS SAS HDD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.

Illustration of Copy Modes

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

Sanitization Methods

Fast Erase Key

Fast Erase Key enables the end-user to perform erase functions asynchronously.

High Compatibility

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX) formats.
• Whole media copy mode supports all system and proprietary formats.
• Supports various brands.
• Designed to support 18TB+ capacities.
• Supports MBR and GPT partitioning.

Auto Rejection of Slow Devices

MTS-SAS Series HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.

Double Data Verification: Compare + CRC Checksum

U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.

Skipping Bad Sectors

End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.

Optional Adapters Supported

Event Log Report

U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Features

• Cable-free connection design allows for quick and easy HDD insertion and removal.
• Directly supports both SAS and SATA devices with high-speed transfer rates up to 30 GB per minute.
• Supports multiple data sanitization modes, including 1-Pass Erase, Secure Erase, and DoD Erase.
• Includes log report management for recording all task details and improving production control.
• Compatible with SATA I/II/III and 4Kn hard drives.

ITS series is a professional SAS/SATA HDD duplicator, specially designed for high volume duplication. Equipped with U-Reach ‘s unique multitasking technology. the ITS series Hard Drive duplicator can simultaneously copy all targets and with a high transfer speed up to 30GB per minute. We guarantee highest productivity without speed degradation, even when the number of targets increase. The ITS series SAS/SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/64), and Mac (HFS, HFS+, HFSX) are supported formats with quick copy.

In addition, the ITS series SAS/SATA Hard Drive duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase which can fulfill different levels of HDD wiping security.

Impeccable High Speed

U-Reach ITS-SAS Series SATA/SAS HDD/SSD duplicator is capable of copying at 30GB/min. on all targets simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

Intelligent Duplication Modes

U-Reach ITS-SAS SAS HDD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.

Illustration of Copy Modes

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

Sanitization Methods

High Compatibility

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX) formats.
• Whole media copy mode supports all system and proprietary formats.
• Supports various brands.
• Designed to support 18TB+ capacities.
• Supports MBR and GPT partitioning.

Auto Rejection of Slow Devices

ITS-SAS Series HDD/SSD duplicator enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.

Double Data Verification: Compare + CRC Checksum

U-Reach duplicators makes straightforward copies, but it is imperative that the copied data are verified through a bit-by-bit process, this will ensure successful copied and reduce customer recalls.

Skipping Bad Sectors

End-users are given options to skip bad sectors from the source device. Access the function to select the numbers of bad sectors to skip, from 0 through unlimited.

Cable Free Design

Easier HDD Insertion & Removal.

Swappable HDD Port Module: easy for replacement and maintenance.

Cable free connection on HDD: supports 1.8″/2.5″/3.5” SATA HDD and SSD.

Via Adaptor: 2.5″, 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, ZIF, iVDR interfaces are compatible.

Optional Adapters Supported

Event Log Report

U-Reach HDD/SSD duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Features

• Speed transfers up to 24 GB per minute.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.)
• Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase + Compare.
• Open platform design supports NVMe & SATA Express M.2/PCIE SSD/Mini PCIe(via adapter).
• Log report management records all task details for better enhanced management.

PH Series – Auto-detect NVMe/SATA PCIe SSD Duplicator

1-5 Auto-detect NVMe/SATA PCIe SSD Duplicator – PH600

• Speed transfers up to 24 GB per minute.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.)
• Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase + Compare.
• Open platform design supports NVMe & SATA Express M.2/PCIE SSD/Mini PCIe(via adapter).
• Log report management records all task details for better enhanced management.

All Available Models：

PH600  PH1100

Impeccable High Speed

U-Reach PH Series PCIe SSD duplicator is capable of copying at 24 GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

No waiting time required for duplication

When each round of duplication is completed, the next round can start immediately without having to wait or restart the machine

Intelligent Duplication Modes

U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.

Illustration of Copy Modes

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

High Compatibility

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
• Whole media copy mode supports all system and proprietary formats.
• Supports various brands.
• Designed to support 18TB+ capacities.
• Supports MBR and GPT partitioning.

Sanitization Methods

●Quick Erase:
Erase HDD index table, and only takes A FEW SECONDS to complete.
●Full Erase:
Erases the entire HDD.
●DoD Erase:
Complies with U.S. Department of Defense erasure standards.
●Secure erase:
A National Institute of Standards and Technology 800-88 accepted
technique for properly purging hard drives. This method is supported by almost all modern SATA/SAS HDD.

Auto Rejection of Slow Devices

U-Reach PH Series PCIe SSD duplicators enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.

Source Management System

The administrator can through a specific software store the image files on the computer for centralized management. When needed, this image files will be sent to the duplicator for duplication. This is designed specifically for production plant  as this makes it easier to mange the source and reduce human error.

Event Log Report

U-Reach PH Series Auto-detect NVMe/SATA PCIe SSD Duplicator has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Features

• Speed transfers up to 24 GB per minute.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.)
• Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase + Compare.
• Open platform design supports NVMe & SATA Express M.2/PCIE SSD/Mini PCIe(via adapter).
• Log report management records all task details for better enhanced management.

PH Series – Auto-detect NVMe/SATA PCIe SSD Duplicator

1-10 Auto-detect NVMe/SATA PCIe SSD Duplicator – PH1100

• Speed transfers up to 24 GB per minute.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.)
• Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase + Compare.
• Open platform design supports NVMe & SATA Express M.2/PCIE SSD/Mini PCIe(via adapter).
• Log report management records all task details for better enhanced management.

All Available Models：

PH600  PH1100

Impeccable High Speed

U-Reach PH Series PCIe SSD duplicator is capable of copying at 24 GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

No waiting time required for duplication

When each round of duplication is completed, the next round can start immediately without having to wait or restart the machine

Intelligent Duplication Modes

U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.

Illustration of Copy Modes

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

High Compatibility

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) formats.
• Whole media copy mode supports all system and proprietary formats.
• Supports various brands.
• Designed to support 18TB+ capacities.
• Supports MBR and GPT partitioning.

Sanitization Methods

●Quick Erase:
Erase HDD index table, and only takes A FEW SECONDS to complete.
●Full Erase:
Erases the entire HDD.
●DoD Erase:
Complies with U.S. Department of Defense erasure standards.
●Secure erase:
A National Institute of Standards and Technology 800-88 accepted
technique for properly purging hard drives. This method is supported by almost all modern SATA/SAS HDD.

Auto Rejection of Slow Devices

U-Reach PH Series PCIe SSD duplicators enable end-users to set the minimum writing speed threshold. This feature was developed to prevent and to eliminate problematic devices that halts the duplication and sanitizing process.

Source Management System

The administrator can through a specific software store the image files on the computer for centralized management. When needed, this image files will be sent to the duplicator for duplication. This is designed specifically for production plant  as this makes it easier to mange the source and reduce human error.

Event Log Report

U-Reach PH Series Auto-detect NVMe/SATA PCIe SSD Duplicator has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Features

• Standalone design without requiring PC for operation.
• Compatible with variety of USB 2.0/3.0/3.1 devices and external USB HDDs.
• Peak transfer speeds up to 2GB/min. per port without speed degradation over thousand of ports.
• Modular socket port design for quick replacement reducing further downtime.
• Redundant external power adapters for fail-over operations without interrupting machine tasks (select models only).
• Supports bit-by-bit copy for all formats, including proprietary and unknown formats.
• Data Sanitization: Quick Erase, Full Erase, and DoD Erase.
• Supports up to 3TB+ capacity for external USB HDDs.
• Supports optional eUSB (USB DOM) 2.54mm and 2.00mm adapters.
• Integrates log report management system for records purpose.
• Supports hardware-level write protection for specified USBs (contact us for details).
• Offers media durability burn-in tests.

The most cutting edge in duplication technology, our Intelligent 9 series USB drive duplicator is professional, standalone and efficient. It can duplicate a full range of USB drives starting from 9 and up to 59 targets. Speed and flexibility are key factors in satisfying customer needs. Its effortless use means a PC or other software are not required; the USB drive duplicator provides a reliable, worry-free copy environment for users, without the risk of virus corruption. This USB duplicator series is integrated with a high-speed compare function to ensure data copies with 100% accuracy. It also boasts quick format capabilities. These features greatly help increase efficiency and production productivity.

The Intelligent 9 Golden series has added some more important functions – Event Log report , Durability test and Double source comparison.

The Intelligent 9 USB drive duplicator is an economical solution for data copy and distribution via USB flash drives. It contains smart, reliable and beneficial functions that provide an outstanding performance and quality that will save you time and money.

Impeccable High Speed

U-Reach USB drive duplicator can copy up to 2GB/min on all devices, simultaneously and without any speed degradation as number of targets increase.

Intelligent Copy Option

Systems and Files (Quick Copy Mode)

• The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.
• This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to “whole media copy” mode.

Whole Media

• The duplicator copies from the initial sector to the end, bit-by-bit.
• There are no format limitation in this mode.

Support High Compatibilities with Various USB Devices

Due to unique redundant power design, it can support special medias with sufficient power supplies, such as: USB 2.0/3.0 external USB hard drives, MP3 players, etc.

Double Source Comparison

Double source comparison can eliminate the chance of a duplication error caused by a worn source. Use the first port as a copying source and use the second port as a compare source. It can guarantee the highest reliability and 100% correctness of the duplication result.

Quality Testing / Checking Functions

Capacity Check
Verifies initial sector and the final sector the connected flash device within 2 seconds.

H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, then devices are formatted into FAT.

Read/Write Speed Check
This function performs a read/write benchmark of the connected devices within 8 seconds.

Burn-in Test

Performs user-defined burn-in tests to flash devices from 30 minutes through 30 days to determine quality and longevity.

Flash Speed and Capacity Filtration

Real-Time Monitoring

Monitor real-time status via PC through USB cable link.

Event Log Report

• Records duplicator operation (time and result).
• Records system and target information details (VID/PID, MID/OID, S/N number).
• An essential tool for production quality remote control and yield analysis.

Mass Duplication W Mode Write Protect USB

Easy Maintenance

With a specially redesigned and improved structure, users can easily change the sockets in 3 simple steps, which takes roughly 1 minute.

STEP 1

Unscrew and remove the cover of the socket.

STEP 2

Replace a damaged socket with a new one.

STEP 3

Screw the cover.

User-Friendly Design

Modular Sockets

Interfaced sockets are subjected to wear-and-tear caused by frequent connections and disconnects. Modular sockets enable quick replacements while reducing downtime, effectively making this solution a long-term and cost-effective ownership.

Ergonomic & Compact Proportions

The refined ergonomic proportion reduces the flash duplicator by 50% to 70% compared to traditional chassis design.

Product Video

Features

• Standalone design without requiring PC for operation.
• Compatible with variety of USB 2.0/3.0/3.1 devices and external USB HDDs.
• Peak transfer speeds up to 2GB/min. per port without speed degradation over thousand of ports.
• Modular socket port design for quick replacement reducing further downtime.
• Redundant external power adapters for fail-over operations without interrupting machine tasks (select models only).
• Supports bit-by-bit copy for all formats, including proprietary and unknown formats.
• Data Sanitization: Quick Erase, Full Erase, and DoD Erase.
• Supports up to 3TB+ capacity for external USB HDDs.
• Supports optional eUSB (USB DOM) 2.54mm and 2.00mm adapters.
• Integrates log report management system for records purpose.
• Supports hardware-level write protection for specified USBs (contact us for details).
• Offers media durability burn-in tests.

The most cutting edge in duplication technology, our Intelligent 9 series USB drive duplicator is professional, standalone and efficient. It can duplicate a full range of USB drives starting from 9 and up to 59 targets. Speed and flexibility are key factors in satisfying customer needs. Its effortless use means a PC or other software are not required; the USB drive duplicator provides a reliable, worry-free copy environment for users, without the risk of virus corruption. This USB duplicator series is integrated with a high-speed compare function to ensure data copies with 100% accuracy. It also boasts quick format capabilities. These features greatly help increase efficiency and production productivity.

The Intelligent 9 Golden series has added some more important functions – Event Log report , Durability test and Double source comparison.

The Intelligent 9 USB drive duplicator is an economical solution for data copy and distribution via USB flash drives. It contains smart, reliable and beneficial functions that provide an outstanding performance and quality that will save you time and money.

Impeccable High Speed

U-Reach USB drive duplicator can copy up to 2GB/min on all devices, simultaneously and without any speed degradation as number of targets increase.

Intelligent Copy Option

Systems and Files (Quick Copy Mode)

• The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.
• This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to “whole media copy” mode.

Whole Media

• The duplicator copies from the initial sector to the end, bit-by-bit.
• There are no format limitation in this mode.

Support High Compatibilities with Various USB Devices

Due to unique redundant power design, it can support special medias with sufficient power supplies, such as: USB 2.0/3.0 external USB hard drives, MP3 players, etc.

Double Source Comparison

Double source comparison can eliminate the chance of a duplication error caused by a worn source. Use the first port as a copying source and use the second port as a compare source. It can guarantee the highest reliability and 100% correctness of the duplication result.

Quality Testing / Checking Functions

Capacity Check
Verifies initial sector and the final sector the connected flash device within 2 seconds.

H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, then devices are formatted into FAT.

Read/Write Speed Check
This function performs a read/write benchmark of the connected devices within 8 seconds.

Burn-in Test

Performs user-defined burn-in tests to flash devices from 30 minutes through 30 days to determine quality and longevity.

Flash Speed and Capacity Filtration

Real-Time Monitoring

Monitor real-time status via PC through USB cable link.

Event Log Report

• Records duplicator operation (time and result).
• Records system and target information details (VID/PID, MID/OID, S/N number).
• An essential tool for production quality remote control and yield analysis.

Mass Duplication W Mode Write Protect USB

Easy Maintenance

With a specially redesigned and improved structure, users can easily change the sockets in 3 simple steps, which takes roughly 1 minute.

STEP 1

Unscrew and remove the cover of the socket.

STEP 2

Replace a damaged socket with a new one.

STEP 3

Screw the cover.

User-Friendly Design

Modular Sockets

Interfaced sockets are subjected to wear-and-tear caused by frequent connections and disconnects. Modular sockets enable quick replacements while reducing downtime, effectively making this solution a long-term and cost-effective ownership.

Ergonomic & Compact Proportions

The refined ergonomic proportion reduces the flash duplicator by 50% to 70% compared to traditional chassis design.

Product Video

Features

• Standalone design without requiring PC for operation.
• Compatible with variety of USB 2.0/3.0/3.1 devices and external USB HDDs.
• Peak transfer speeds up to 2GB/min. per port without speed degradation over thousand of ports.
• Modular socket port design for quick replacement reducing further downtime.
• Redundant external power adapters for fail-over operations without interrupting machine tasks (select models only).
• Supports bit-by-bit copy for all formats, including proprietary and unknown formats.
• Data Sanitization: Quick Erase, Full Erase, and DoD Erase.
• Supports up to 3TB+ capacity for external USB HDDs.
• Supports optional eUSB (USB DOM) 2.54mm and 2.00mm adapters.

The most cutting edge technology in duplication, our Intelligent 9 series USB duplicator is professional, standalone and efficient. It can duplicate a full range of USB drives starting from 4 and up to 59 targets. Speed and flexibility are key factors in satisfying customer needs. Simplicity, a PC or other software are not required; the USB drive duplicator provides a reliable, worry-free copy environment for users, without the risk of virus corruption. This USB duplicator series is integrated with a high-speed compare function to ensure data copies with 100% accuracy. It also boasts quick format capabilities. These features greatly increase efficiency and production productivity.

The Intelligent 9 USB duplicator is not only competent, but also has several ingenious smart device check functions; flash devices quality check, real capacity, device speed and formatting.
The Intelligent 9 USB duplicator is an economical solution for data copy and disposal via USB flash drives. It contains smart, reliable and beneficial functions that provide an outstanding performance with quality that will save you time and money.

Impeccable High Speed

U-Reach USB drive duplicator can copy up to 2GB/min on all devices, simultaneously and without any speed degradation as number of targets increase.

Intelligent Copy Option

Systems and Files (Quick Copy Mode)

• The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.
• This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to “whole media copy” mode.

Whole Media

• The duplicator copies from the initial sector to the end, bit-by-bit.
• There are no format limitation in this mode.

Support High Compatibilities with Various USB Devices

Due to unique redundant power design, it can support special medias with sufficient power supplies, such as: USB 2.0/3.0 external USB hard drives, MP3 players, etc.

Quality Testing / Checking Functions

H3 Read Only Test
Determines if the flash is readable. This test will not modify pre-existing data.

Capacity Check
Verifies initial sector and the final sector the connected flash device within 2 seconds.

H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, then devices are formatted into FAT.

Read/Write Speed Check
This function performs a read/write benchmark of the connected devices within 8 seconds.

H6 Quality Test
Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats.

Flash Speed and Capacity Filtration

Real-Time Monitoring

Monitor real-time status via PC through USB cable link.

Easy Maintenance

With a specially redesigned and improved structure, users can easily change the sockets in 3 simple steps, which takes roughly 1 minute.

STEP 1

Unscrew and remove the cover of the socket.

STEP 2

Replace a damaged socket with a new one.

STEP 3

Screw the cover.

User-Friendly Design

Modular Sockets

Interfaced sockets are subjected to wear-and-tear caused by frequent connections and disconnects. Modular sockets enable quick replacements while reducing downtime, effectively making this solution a long-term and cost-effective ownership.

Ergonomic & Compact Proportions

The refined ergonomic proportion reduces the flash duplicator by 50% to 70% compared to traditional chassis design.

Features

• Speed transfers up to 24 GB per minute.
• Systems & files copy mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX.)
• Data Sanitization: Quick Erase, Full Erase, DoD Erase and DoD Erase+Compare.
• Open platform design supports NVMe & SATA Express M.2/U.2(via adapter)/PCIE SSD/Mini PCIe(via adapter).
• Log report management records all task details for better enhanced management.
• Cable free connection for easier M.2 connection and disconnection.
• Supports M key and B+M key for M.2 PCIe devices.

U-Reach PE Series is a professional PCIe NVMe M.2 duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy PCIe M.2 devices with a high transfer speed of 24 GB per minute.

Impeccable High Speed

U-Reach PE Series PCIe SSD duplicator is capable of copying at 24GB/min. on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

No waiting time required for duplication

When each round of duplication is completed, the next round can start immediately without having to wait or restart the machine

Native Support NVMe and SATA Protocols

Converter chips are not being adopted by PCIe series which deploys an M.2 interface with native NVMe/SATA protocols. This directly transfer the data to enhance the compatibility during the duplications.

FPGA-based Platform

Industrial-grade FPGA design not only facilitates cross interface / cross-protocol duplication but avoids restarting the system after each round of duplication.

Note: When doing cross-protocol duplication, it is recommended to use a data disk. If you are copying OS system, it is recommended to use the same protocol device to ensure the device can boot into the operating system properly.

Intelligent Duplication Modes

U-Reach PCIe SSD duplicator offers a diverse of duplication modes. The user may select the appropriate mode based on application demand.

Illustration of Copy Modes

The areas containing data are marked in blue. The areas being copied are marked in red. Duplication time depends on the speed supported by the hard drive’s controller chip.

Sanitization Methods

Cross Interface Duplication

PE Series with the corresponding module,  it can duplicate target with different interface.

Source Management System

The administrator can through a specific software store the image files on the computer for centralized management. When needed, this image files will be sent to the duplicator for duplication. This is designed specifically for production plant  as this makes it easier to mange the source and reduce human error.

High Compatibility

• Quick copy mode supports Windows (FAT16/32/64), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX) formats.
• Whole media copy mode supports all system and proprietary formats.
• Supports various brands.
• Designed to support 18TB+ capacities.
• Supports MBR and GPT partitioning.

Event Log Report

U-Reach PCIe SSD(M.2) duplicators has an unique mechanism to prevent alteration of its Event Log Report. It records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Support Interfaces

Product Video

Features

• Standalone design without requiring PC for operation.
• Compatible with variety of USB 2.0/3.0/3.1 devices and external USB HDDs.
• Peak transfer speeds up to 2GB/min. per port without speed degradation over thousand of ports.
• Modular socket port design for quick replacement reducing further downtime.
• Redundant external power adapters for fail-over operations without interrupting machine tasks (select models only).
• Supports bit-by-bit copy for all formats, including proprietary and unknown formats.
• Data Sanitization: Quick Erase, Full Erase, and DoD Erase.
• Supports up to 3TB+ capacity for external USB HDDs.
• Supports optional eUSB (USB DOM) 2.54mm and 2.00mm adapters.

The most cutting edge technology in duplication, our Intelligent 9 series USB duplicator is professional, standalone and efficient. It can duplicate a full range of USB drives starting from 4 and up to 59 targets. Speed and flexibility are key factors in satisfying customer needs. Simplicity, a PC or other software are not required; the USB drive duplicator provides a reliable, worry-free copy environment for users, without the risk of virus corruption. This USB duplicator series is integrated with a high-speed compare function to ensure data copies with 100% accuracy. It also boasts quick format capabilities. These features greatly increase efficiency and production productivity.

The Intelligent 9 USB duplicator is not only competent, but also has several ingenious smart device check functions; flash devices quality check, real capacity, device speed and formatting.
The Intelligent 9 USB duplicator is an economical solution for data copy and disposal via USB flash drives. It contains smart, reliable and beneficial functions that provide an outstanding performance with quality that will save you time and money.

Impeccable High Speed

U-Reach USB drive duplicator can copy up to 2GB/min on all devices, simultaneously and without any speed degradation as number of targets increase.

Intelligent Copy Option

Systems and Files (Quick Copy Mode)

• The duplicator automatically copies only the data area, rather than the empty spaces within the capacity, which reduces the duration of the copy process.
• This copy mode supports the file formats such as Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX). If the file system format to be copied is not among the supported formats above, then system will automatically switch to “whole media copy” mode.

Whole Media

• The duplicator copies from the initial sector to the end, bit-by-bit.
• There are no format limitation in this mode.

Support High Compatibilities with Various USB Devices

Due to unique redundant power design, it can support special medias with sufficient power supplies, such as: USB 2.0/3.0 external USB hard drives, MP3 players, etc.

Quality Testing / Checking Functions

H3 Read Only Test
Determines if the flash is readable. This test will not modify pre-existing data.

Capacity Check
Verifies initial sector and the final sector the connected flash device within 2 seconds.

H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. Once the test passes, then devices are formatted into FAT.

Read/Write Speed Check
This function performs a read/write benchmark of the connected devices within 8 seconds.

H6 Quality Test
Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats.

Flash Speed and Capacity Filtration

Real-Time Monitoring

Monitor real-time status via PC through USB cable link.

Easy Maintenance

With a specially redesigned and improved structure, users can easily change the sockets in 3 simple steps, which takes roughly 1 minute.

STEP 1

Unscrew and remove the cover of the socket.

STEP 2

Replace a damaged socket with a new one.

STEP 3

Screw the cover.

User-Friendly Design

Modular Sockets

Interfaced sockets are subjected to wear-and-tear caused by frequent connections and disconnects. Modular sockets enable quick replacements while reducing downtime, effectively making this solution a long-term and cost-effective ownership.

Ergonomic & Compact Proportions

The refined ergonomic proportion reduces the flash duplicator by 50% to 70% compared to traditional chassis design.