MikroTik – DirectB2B

Mikrotik GESP+POE-IN

design4site — Tue, 19 May 2026 14:15:59 +0000

The MikroTik GESP+POE-IN is a passive PoE injector with built-in surge protection, designed to safely deliver power to network devices while protecting sensitive equipment from voltage spikes, lightning-induced surges, and static discharge. It is part of the MikroTik GESP surge protection ecosystem, created for installations where long Ethernet runs and outdoor conditions increase electrical risks. By combining power injection and surge protection in a single compact unit, GESP+POE-IN helps reduce equipment failure, network downtime, and maintenance costs. When used together with other GESP devices, it provides protection for both data and power lines, ensuring stable operation even in harsh electrical environments. This makes GESP+POE-IN an essential component for wireless links, outdoor access points, and professional network deployments where reliability and safety are critical.

In a typical deployment, a GESP surge protector is installed near antennas or radios on a mast, enclosed in a weatherproof IP67 housing to protect outdoor equipment. The GESP+POE-IN injector is then placed below the mast, closer to switches and power sources, where it delivers passive PoE while protecting indoor equipment. Proper grounding is essential: the grounding wire must be securely connected to a rack, mast, or any grounded structure to ensure effective surge dissipation. For maximum protection, MikroTik recommends using surge protection on both ends of long Ethernet cables. GESP devices are designed to absorb multiple surge events, but should be inspected after each major incident. Installation is simple using PVC zip ties, and a K-73 fastening set is included.

מפרט טכני:

Connectors
Ethernet Connector	RJ45, RJ45 Jack
Interfaces
RJ45 Ports	(2) 1 Gbps
Number of PoE Ports	1 pcs
PoE Out Standards	Passive PoE
Physical Parameters
Color	Black
Operating Temperature	-40 °C to 70 °C
Environment	Indoor

הפוסט Mikrotik GESP+POE-IN הופיע לראשונה ב-DirectB2B.
design4site

MikroTik LTE 5G and LoRa IoT Antenna

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik LTE 5G and LoRa IoT Antenna

The MikroTik HGO-LTE-W is a compact and versatile combo antenna designed for Internet-of-Things applications that require support for both LTE and LoRa® connectivity. Covering an exceptionally wide frequency range from 699 MHz to 3.8 GHz, it eliminates the need for multiple antennas in mixed IoT deployments. A single antenna can be used for LTE/5G, CAT-M, NB-IoT, and LoRa® communication, simplifying installation and reducing hardware complexity. The antenna automatically transmits the signal provided by the modem, making it a flexible solution for diverse use cases. It is an ideal match for the MikroTik KNOT LR series, enabling reliable communication with LoRa® devices while forwarding data to the cloud via cellular networks. With a gain of 1.5 to 4 dBi, the HGO-LTE-W delivers balanced performance for both short- and long-range IoT scenarios, making it suitable for smart infrastructure, industrial monitoring, and remote sensing deployments.

The HGO-LTE-W is built for continuous and reliable operation in demanding environments. It features an RP-SMA male connector, ensuring secure and stable connectivity with compatible MikroTik devices. The antenna is designed for long-term use, with an MTBF of approximately 100,000 hours at 25°C, making it well-suited for always-on IoT installations. Tested for ambient temperatures ranging from -40°C to +70°C, the antenna can be deployed in harsh indoor and outdoor conditions without compromising performance. Its durable construction ensures stable signal transmission across supported frequency bands, even in challenging environments. By combining wide frequency support, dependable performance, and a compact form factor, the HGO-LTE-W offers a practical and cost-effective antenna solution for modern IoT networks that rely on both cellular and LoRa® technologies.

מפרט טכני:

Mobile Network
Mobile Network Generation	4G (LTE), 5G (NR), NB-IoT
Antenna
Antenna Design	Omni
Mobile Antenna Gain	1.5 dBi, 1.5 dBi, 3.6 dBi
Connectors
RF Connectors	(1) SMA Male
Physical Parameters
Dimensions	215 x 30 x 15 mm
Operating Temperature	-40 °C to 70 °C
Environment	Indoor

הפוסט MikroTik LTE 5G and LoRa IoT Antenna הופיע לראשונה ב-DirectB2B.
design4site

MikroTik GPeR

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik GPeR

The MikroTik GPeR (Gigabit Passive Ethernet Repeater) is a key element of the GPEN (Gigabit Passive Ethernet Network) concept, designed to replace traditional GPON installations with a more affordable and easier-to-deploy Ethernet-based alternative. It allows network operators, installers, and building owners to build long-distance Ethernet networks using standard CAT6 cabling, without the complexity and cost of fiber infrastructure.

The GPeR makes it possible to extend an Ethernet link far beyond the usual 100-meter limitation. Each additional GPeR unit adds another hop, enabling distances of up to 100–150 meters to standard network devices, or up to 210 meters between two GPeR units (depending on cable quality). By chaining multiple repeaters, Ethernet links can be extended up to 1.5 km when one side provides PoE power, or up to 3 km when both ends of the link have PoE sources. This makes the GPeR especially useful in high-rise buildings, large residential complexes, and multi-section properties where very long cable runs are unavoidable.

The device supports Passive PoE passthrough, allowing power to be delivered together with data over the same Ethernet cable. If the connected device does not support PoE-in, the passthrough function can be easily disabled by removing the onboard jumpers, ensuring safe operation with non-PoE equipment.

Typical use cases include extending Ethernet links to remote floors or rooftops, connecting access points and switches in large apartment buildings, or building centralized GPEN-based networks where power and connectivity are distributed efficiently across long distances. Compact, passive, and reliable, MikroTik GPeR is a practical solution for scalable Ethernet networks where distance, simplicity, and cost-efficiency matter.

* When planning deployments, voltage drop over long cable runs and multiple GPeR units should be taken into account; if power becomes insufficient, an alternative power source can be used.

מפרט טכני:

Interfaces
RJ45 Ports	(2) 1 Gbps
Number of PoE Ports	1 pcs
PoE Out Standards	802.3af (PoE), 802.3at (PoE+)
Power
Power Method	24V Passive PoE, 48V Passive PoE, 802.3af PoE, 802.3at PoE+
Power Supply	External PoE Adapter
Supported Input Voltage	24 – 57 V DC
Max Power Consumption	2 W
Physical Parameters
Operating Temperature	-40 °C to 70 °C

הפוסט MikroTik GPeR הופיע לראשונה ב-DirectB2B.
design4site

MikroTik GPeRx4

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik GPeRx4

The MikroTik GPeR (Gigabit Passive Ethernet Repeater) is a robust solution designed to extend Ethernet connections over long distances, making it ideal for high-rise buildings and expansive industrial complexes. By allowing Ethernet cable extensions up to 1,500 meters, the GPeR overcomes the standard 100-meter Ethernet limitation, ensuring reliable connectivity across vast areas. Its compact design and passive operation facilitate seamless integration into existing network infrastructures without the need for additional power sources or complex configurations. The GPeR supports both PoE input and output, adhering to 802.3af/at standards and accommodating a wide voltage range of 24-57V. This feature enables the device to receive power from a PoE-enabled source and, in turn, supply power to downstream devices, streamlining installations by reducing the need for separate power lines. The device’s PoE passthrough capability can be disabled if the connected device does not support PoE, offering flexibility in various deployment scenarios.

Equipped with two Gigabit Ethernet ports, the GPeR ensures high-speed data transmission, maintaining network performance even over extended distances. The device is designed to handle maximum output per port, with 2A for input voltages between 18-30V and 0.7A for 30-57V inputs, ensuring consistent power delivery to connected devices. Its robust construction and efficient power management contribute to enhanced network reliability and uptime. The GPeR is engineered to operate in a wide temperature range, from -40°C to 70°C, making it suitable for deployment in various environmental conditions. Its durable design ensures longevity and consistent performance, even in harsh climates. This versatility makes the GPeR an excellent choice for extending network connectivity in both urban and industrial settings, providing a reliable solution for complex networking challenges.

מפרט טכני:

Interfaces
RJ45 Ports	(4) 1 Gbps
Number of PoE Ports	3 pcs
PoE Out Standards	802.3af (PoE), 802.3at (PoE+)
Power
Power Method	AC/DC Adapter, 802.3bt PoE++
Power Supply	External PoE Adapter
Supported Input Voltage	– V DC
Max Power Consumption	115 W
Physical Parameters
Ingress Protection Code	IP68
Dimensions	281 x 76 x 70 mm
Operating Temperature	-40 °C to 70 °C
Environment	Indoor, Outdoor
Package Contains
External Power Supply	Not Included

הפוסט MikroTik GPeRx4 הופיע לראשונה ב-DirectB2B.
design4site

MikroTik GESP

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik GESP

The MikroTik GESP is a Gigabit Ethernet surge protector designed to shield network equipment from lightning strikes, power surges, and static electricity that can occur in outdoor or long-distance Ethernet installations. It is especially useful in scenarios where network cables run between buildings, along masts, or through exposed outdoor environments. By absorbing sudden voltage spikes, GESP helps prevent damage to switches, routers, access points, and wireless radios, reducing downtime and costly hardware replacements. With an estimated MTBF of approximately 100,000 hours at 25°C, it is built for long-term, continuous operation. The device supports full Gigabit Ethernet speeds without introducing noticeable signal loss, making it suitable for professional ISP deployments, enterprise networks, and outdoor wireless links where reliability and equipment protection are critical.

In a typical deployment, GESP units are installed at both ends of a long Ethernet cable: one near antennas or radios mounted on a mast and the other near indoor switches or routers. Each unit is housed in a durable IP67-rated weatherproof enclosure, protecting it from rain, dust, and harsh environmental conditions. Proper grounding is essential for effective surge protection: the grounding wire must be securely connected to a rack, mast, or any grounded structure. For maximum safety, MikroTik strongly recommends using surge protectors on both ends of exposed cable runs. The GESP can usually withstand multiple surge events, but its condition should be checked after major incidents. Installation is simple and secure using the included K-73 fastening set, making it easy to integrate into new or existing networks.

מפרט טכני:

Connectors
Ethernet Connector	RJ45, RJ45 Jack
Interfaces
RJ45 Ports	(2) 1 Gbps
Number of PoE Ports	1 pcs
PoE Out Standards	Passive PoE
Physical Parameters
Color	Black
Ingress Protection Code	IP67
Operating Temperature	-40 °C to 70 °C
Environment	Outdoor

הפוסט MikroTik GESP הופיע לראשונה ב-DirectB2B.
design4site

MikroTik 2.4GHz Dipole Outdoor Antenna

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik 2.4GHz Dipole Outdoor Antenna

The MikroTik ACOMNIRPSMA is a high-quality 2.4 GHz dipole antenna with 5 dBi gain, designed to deliver reliable and even wireless coverage in outdoor and multipoint network deployments. Operating across the 2400–2500 MHz ISM band, it fully supports IEEE 802.11b/g/n wireless standards. With a 360-degree horizontal radiation pattern and linear polarization, the antenna provides consistent signal distribution in all directions, making it ideal for access points serving multiple clients simultaneously. The antenna uses a PCB design with a 50 Ω impedance, ensuring stable performance and compatibility with MikroTik wireless devices. It is particularly well suited for the BaseBox product series, offering a cost-effective way to build omnidirectional outdoor access points with dependable signal quality.

By attaching two ACOMNIRPSMA antennas to a BaseBox2, you can easily create a 2×2 MIMO 2.4 GHz access point, effectively turning the device into a compact “2.4 GHz OmniTik”-style solution. This configuration is ideal for outdoor campus networks, including campgrounds, trailer parks, marinas, and other open public areas where wide, uniform coverage is required. The antenna features a weatherproof and corrosion-resistant ABS housing, allowing reliable outdoor operation without additional protection. When both antennas are properly installed, the BaseBox can be used without its top cover, simplifying deployment. With a compact 147 mm length, a weight of only 30 g, and an RP-SMA male connector, installation is fast and flexible. The antenna operates reliably in temperatures from -30 °C to +85 °C.

מפרט טכני:

Wireless Network
Generation	WiFi 4
Standards	802.11n
Frequency	2.4GHz
Antenna
Antenna Design	Omni
Wireless Antenna Frequency Range & Gain	2.4 – 2.5 (GHz) 5 (dBi)
Beamwidth	360 ° Horizontal
Polarization	Linear
VSWR	< 2.0
Impedance	50 Ω
Connectors
RF Connectors	(1) RP-SMA Male
Physical Parameters
Color	White
Material	ABS Plastic
Dimensions	L=147 mm
Weight	0.03 kg
Operating Temperature	-30 °C to 85 °C
Environment	Outdoor

הפוסט MikroTik 2.4GHz Dipole Outdoor Antenna הופיע לראשונה ב-DirectB2B.
design4site

MikroTik GPeRx6 –6-Port Gigabit PoE Extender for Outdoor Networks

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik GPeRx6 –6-Port Gigabit PoE Extender for Outdoor Networks

The MikroTik GPeRx6 (CSS606-1G-2Gi-3S+OUT) is a compact outdoor switch that simplifies network design by combining data and power delivery in a single solution. It is equipped with three Gigabit Ethernet ports and three 10G SFP+ ports, offering both copper and fiber connectivity for flexible network topologies. The first Ethernet port supports PoE-in, while ports two and three can provide PoE-out to power compatible devices such as IP cameras or wireless access points. Built with a dedicated 10G switching chip, the GPeRx6 ensures high performance and stable throughput. The rugged IP66-rated enclosure protects the hardware from dust and water, while its wide operating temperature range from –40 °C to +70 °C makes it reliable in harsh environments. Compact and rugged, it is easy to mount in outdoor installations, providing enterprise-grade performance in a streamlined and durable design.

The GPeRx6 offers flexible power input options through both a DC jack (12–57 V) and PoE-in (42–57 V, 802.3bt standard). Power consumption is efficient, starting from just 6 W without additional load and scaling up to 160 W at full output. Two Ethernet ports support PoE-out, delivering up to 57 V of passive PoE for connected devices. Depending on input voltage, each PoE-out port can supply up to 1.2 A (below 30 V) or 0.625 A (above 30 V), with a maximum combined current of 2.4 A. In addition, the device includes three DC outputs for powering equipment that does not support PoE. This combination of Ethernet, fiber, and multiple power delivery options makes the GPeRx6 extremely versatile, reducing the need for external adapters or separate power infrastructure while supporting diverse devices in outdoor networks.

The GPeRx6 is designed for demanding environments where durability and simplicity are essential. Its IP66-rated outdoor enclosure ensures resistance to dust, rain, and extreme conditions, while the broad temperature tolerance makes it dependable year-round. By combining 10G SFP+ ports for long-distance fiber uplinks with Gigabit Ethernet for local connections, it bridges modern backbone infrastructure with edge devices. The built-in PoE-out and DC-out functions reduce cabling requirements by simultaneously delivering data and power through the same hybrid cable. This feature is especially valuable for surveillance cameras, remote access points, IoT sensors, and perimeter security installations. The GPeRx6 significantly simplifies deployment by cutting down on extra cabling, external power supplies, and weatherproofing measures. As a result, it offers a cost-effective way to build scalable outdoor networks that are both powerful and reliable, providing long-term flexibility for operators and enterprises.

מפרט טכני:

Interfaces
RJ45 Ports	(3) 1 Gbps
Number of PoE Ports	2 pcs
PoE Out Standards	Passive PoE
SFP Ports	(3) 10G SFP+
Power
Power Method	AC/DC Adapter, 802.3bt PoE++
Supported Input Voltage	12 – 57 V DC
Max Power Consumption	160 W
Power Connector	DC Plug 2.1 x 5.5 mm
Physical Parameters
Ingress Protection Code	IP66
Dimensions	406 x 116 x 76 mm
Operating Temperature	-40 °C to 70 °C
Environment	Outdoor
Mounting Method	Pole Mount
Package Contains
External Power Supply	Not Included

הפוסט MikroTik GPeRx6 –6-Port Gigabit PoE Extender for Outdoor Networks הופיע לראשונה ב-DirectB2B.
design4site

MikroTik ACGPSA GPS Antenna with Cable 5m

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik ACGPSA GPS Antenna with Cable 5m

The MikroTik ACGPSA is a standalone active GPS antenna designed to operate in the 1575.4 MHz spectrum. It delivers reliable and accurate positioning data for your MikroTik LtAP or LtAP mini devices. With compact dimensions of 46.5 × 26.5 × 12.5 mm, the antenna is suitable for a wide range of deployment scenarios. Its active design ensures stable GPS signal reception, which is ideal for mobile, IoT, or vehicular setups where precise timing and location information are required.

The ACGPSA is rated IP67, making it resistant to dust and water ingress, perfect for outdoor use. It comes with an internal magnet and double-sided tape, allowing it to be securely attached to metal or flat surfaces. A long 5-meter cable with SMA male connector enables flexible installation. To connect with LtAP devices, the ACSMAUFL pigtail is required (sold separately), providing a convenient and secure link between antenna and router.

מפרט טכני:

Antenna
Antenna Design	Roof
GPS Antenna Frequency Range & Gain	1575.42 MHz 3 dBic (Zenith)
Cable Length	5 m
Connectors
RF Connectors	(1) SMA Male
Physical Parameters
Color	Black
Ingress Protection Code	IP67
Dimensions	46.5 x 46.5 x 12.5 mm
Weight	0.12 kg
Operating Temperature	-40 °C to 85 °C
Environment	Outdoor
Mounting Method	Magnetic

הפוסט MikroTik ACGPSA GPS Antenna with Cable 5m הופיע לראשונה ב-DirectB2B.
design4site

Hot Swap Fan for CCR2216-1G-12XS-2XQ

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
Hot Swap Fan for CCR2216-1G-12XS-2XQ

The MikroTik MT-HotSwapFan is a backup hot-swappable cooling fan designed for MikroTik high-performance devices such as the CCR2216 and CRS518. It allows you to replace a faulty or worn fan without powering down the device, helping maintain continuous operation in mission-critical network environments. This is especially important in data centers, enterprise networks, and ISP installations where uptime and reliability are essential. The fan is engineered to provide stable airflow and efficient heat dissipation, ensuring optimal operating temperatures for demanding workloads.

With an estimated MTBF of approximately 100,000 hours at 25°C, the MT-HotSwapFan is designed for long-term, dependable performance. It is ideal as a spare or replacement fan to keep on hand for preventive maintenance or rapid service. Using original MikroTik replacement components ensures full compatibility, proper fit, and consistent cooling performance, helping extend the lifespan of your networking equipment while minimizing downtime and service interruptions.

מפרט טכני:

Physical Parameters
Material	Metal
Environment	Indoor
Form Factor	Embedded

הפוסט Hot Swap Fan for CCR2216-1G-12XS-2XQ הופיע לראשונה ב-DirectB2B.
design4site

MikroTik NVMe Drive Tray –Caddy for NVMe SSD Storage

design4site — Tue, 19 May 2026 14:15:59 +0000

DirectB2B
MikroTik NVMe Drive Tray –Caddy for NVMe SSD Storage

The MikroTik CADDY is a dedicated NVMe SSD mounting tray designed specifically for use with the MikroTik ROSE Data Server. Engineered for seamless compatibility, the tray provides secure and tool-free installation of M.2 NVMe drives into the server’s hot-swappable drive bays, ensuring optimal performance and ease of maintenance. Constructed from high-quality materials, the CADDY offers reliable thermal contact and robust structural support, helping to maintain drive stability under sustained workloads. Its precise fit ensures proper electrical and mechanical alignment with the ROSE chassis, allowing for consistent high-speed data transfers. Ideal for expanding storage or replacing drives in enterprise or high-performance network environments, the MikroTik CADDY is a critical accessory for maximizing the functionality and scalability of your ROSE Data Server setup.

מפרט טכני:

Physical Parameters
Color	Black
Material	Plastic
Form Factor	Embedded
Package Contains
Units	1 pcs

הפוסט MikroTik NVMe Drive Tray –Caddy for NVMe SSD Storage הופיע לראשונה ב-DirectB2B.
design4site